Basket is empty
  • Kalibrius PA-500Spec


Kalibrius PA-500Spec
2|3|4|5
Kalibrius PA-500Spec

2 504 eur Buy
Brand: Kalibrius

For packing of customer’s items (tea, perfumery, etc) with or without thermo shrink. Semi-automatic wrapping machine up to 600 packs per hour.

Machine is intended for semi-automatic packing of different items in a polypropylene film. In factory it is tuned up for semi-automatic packing of customer’s item: soap, tea, perfumery, candies, cigarettes, etc.

Separate digital control and temperature indication for two thermo electric heaters, adjustment of cutting wire heating duration, an automatic maintenance of temperature in a prescribed limits, indication of machine heating, general and twenty-four-hour counter of packed items, microprocessor control.

Operator’s duty is only a primary splicing. Then operator puts an item to a transporter and presses a micro switch. Carriage pushes an item along guiding rails, along shaping side units, along hot thermo electric heaters and ejects it behind the machine, completely packed. Shaping of side flaps was fulfilled automatically. Simultaneously operator can conduct the next primary splicing. This mode when the carriage moves up to the end of tunnel, provides up to 400 packs per hour and is called a full pass of carriage.

To increase productivity up to 600 packs per hour one need to use short pass of carriage. In this case the item to be packed is pushed by the carriage for about 1/3 of the tunnel length then carriage returns to the beginning position. Then operator puts next item on transporter. The carriage again pushes the item for 1/3 of the tunnel length. In such a way the last article starts to push the previous one. Then operator repeats this action with the next article. So all boxes are collected in a queue. In case of need you can press emergency button in any step and carriage will go full tunnel length and push all boxes out.

Note: manufacture of the machine having short pass of carriage depends on the item size and is possible not for any PA-500Spec.

Machine’s capabilities and operator’s qualification allows to get a high quality of the packed box. The DVD containing video film with instruction on operation is applied to the machine.

Having installed on machine a tear tape dispenser (which is sold separately) you can pack articles with tear tape. The tear tape is unwound simultaneously with a polypropylene film and automatically sticks to it. So, the use of this option does not draw operator’s attention away from the process and does not complicate his operation.





Manufacture of the machine

Basic components are always available. Parts needed for your box are designed specifically and manufactured within 15 working days after concordance of all details and 70-100% prepayment. Before you call us please check compliance of your box dimensions with the machine capabilities:

  • Height: 10-100 mm
  • Depth: depth+height not more than 180 mm, and depth should be not less than height
  • Width: width+4/3 height should be not more 240 mm

Final answer on possibility of packing on PA-500 Spec is possible only after analysis of boxes received from customer. These boxes also will be needed for us to adjust machine later.




Packing samples





Specifications

Productivity in a semiautomatic mode up to 600 packs per hour
Productivity in a manual mode up to 200 packs per hour
Envelope shaping semiautomatic / manual
Cutting-off of the film automatic
Temperature range 30…220 0С
Temperature stability ± 2 0С
Electric power supply for the thermo electric heater and cutting wire 18…24 Volts
Film type biaxial oriented polypropylene
Film thickness 20…35 micrometers
Maximal width of roll 235 mm
Maximal roll diameter 370 mm
Internal roll diameter 76 mm
Thermo shrink as an option
Mode of operation twenty-four-hour
Type of packing envelope
Dimension, L * W * H 695 * 310 * 285 mm
Dimension in package 720 * 300 * 270 mm
Weight netto/brutto 26 / 27 kg
Power consumption 140 Watts
Maximal consumption current 1.01 A





  • Comments


102550100
 
George (Kalibrius)
Manual machines TS-200 and TS-380 fits for these boxes packing. As well as semi-automatic PA-500spec machine.
Write a comment on this topic...
 
Antony
How long will the procedure of purchase and machine setup take?
George (Kalibrius)
Procedure of buying the machine takes about 5-10 minutes. The term of production of the machine for your box is 1-2 weeks. Then machine adjustment may be needed, it takes approximately 1 hour.
Write a comment on this topic...
 
Peter
We need to pack metal kitchen sponges of irregular shape. Have you some recommendations?
George (Kalibrius)
For the packing of metal kitchen sponges of irregular shape we can advise equipment which packs with a seam.
Write a comment on this topic...
 
Judith
Hallo George and Alex, is there a possibility to use the PA-500 for more than one height and lenght? Or would it be possible to adjust it to this need? I do have two products, both of whom have one 5cm length, but vary in the second length and also in height (5x5x5 and 5x8x2,3). And is there perhaps a picture, where I can see the PA-500 with what you call "short pass of carriage", so that I cann get the idea? Thanks for answering!
George (Kalibrius)
Hello Judith, Yes, there is a possibility to use PA-500 for more than one height and lenght. It is an adjustable machine, and in order to adjust it to the other size, you will have to use the replaceable module. Yes, we can produce packing machine for your 50х50х50 and 50х80х23 mm products.
Write a comment on this topic...
 
Sabine
meine Seifen sind 5cm x 7xcm x 2cm oder runde im Durchmesser 60mm. Ist das möglich
George (Kalibrius)
Dear Sabine, Yes, it is possible to pack a soap only of 5 cm x 7 cm x 2 cm size and quite impossible to pack a round soap on our Kalibrius PA-500 Spec packing machine.
Write a comment on this topic...
 
Andrzej
Hi, is this equipment suitable for packing with dimensions 130 * 110 * 85mm?
George (Kalibrius)
Hello Andrzej! Yes, it will do.
Write a comment on this topic...
 
Alexander
Good afternoon! Is it possible to pack boxes 55 * 110 * 160 mm?
George (Kalibrius)
Hi. Yes, packing of boxes of this size is possible on this machine.
Write a comment on this topic...
 
Siddhartha

Have you supplied it in India..Pl share the user detail

Sergey (Kalibrius)

Hello!
No, we're not doing that at the moment.

Write a comment on this topic...
 
Name

Can you offer international courier service to South Korea?

Sergey (Kalibrius)

Hi. No, we haven`t.

Write a comment on this topic...
 
Josef

Hi

Can this machin packing Marlboro Ciggaret like smal paket or big size paket?
Is that posibol u send ur machin to Sweden?

Sergey (Kalibrius)

Hello. Нes, you will be able to pack your products on this machine. Yes, it is possible to send this machine to you.

Write a comment on this topic...
 
Name

I need to know if the machines you have can overwrap the packs of cigarettes in stick (bundle) as we put on market 5x5.

Size is approx 270x85x42 mm

if yes send me by whattsapp.I am located in Malta-Europe

Sergey (Kalibrius)

Hello. We will not be able to produce a semi-automatic machine for your box. It's very big. Take a closer look at the characteristics of the PA-500 machine.

Write a comment on this topic...
 
chris

do you think it would melt small box of chocolates thru it. I am interested

Sergey (Kalibrius)

Hi. Yes, of course.

Write a comment on this topic...
 
kinza

I want to buy this machine how i can get it jn UAE

Sergey (Kalibrius)

Hi. Send your request, delivery address and bank details to us by mail support@kalibrius.com

Write a comment on this topic...

Write a new comment



© Company "Kalibrius", 2012-2024